Alfatronix PV6S 24-12V 6A Converter (Non Isolated)

Alfatronix 24-12V 6A Converter (Non Isolated) 

Low cost unit w/o isolation

These products offer a convenient way to operate mass produced 12Vdc equipment such as cell phones, in car entertainment, professional communication and telematics equipment, refrigerators, televisions etc. from the 24Vdc mobile electrical systems found on diesel engined vehicles and vessels.

Tamper Proof

There are no ventilation holes to permit stray objects, dust or water droplets to enter the case. There are no external fuses to be tampered with. Fuses will only blow if there is a fault so there is no need to make them accessible.

All PowerVerters are enclosed in a rugged aluminium extrusion. The low mass Surface Mount Technology components are also less prone to damage from vibration and shock, further increasing the reliability of the units.

3Amp units are excellent for charging mobile phones, while 6A units suit a variety of mobile radio applications.

Galvanically isolated units are suitable for marine applications and come complete with the green tamperproof label for petrochemical applications.

Fast Installation

All the units consume an off load current of less than 15mA, which is probably less than the self discharge current of the vehicle’s battery. In most cases this can be ignored, speeding the installation by removing the need to fit a remote switch. All products fit onto a ‘Click ‘n’ Fit mounting clip which is fixed in three points allowing it to be mounted on uneven surfaces. It is easy to fit the clip into awkward places and then simply click the unit into position. A red LED indicates when there is output from the converter. This gives reassurance to the installation enginer and speeds fault finding.

By Alfatronix, the PV6S Convertor 24v-12v, 6A/10A non isolated system, is a Powervertor which allows a 12Vdc output from a 24Vdc input. The unit is IP53 rated meaning there are no ventilation holes to permit stray objects, dust or water to enter the unit. Is easilly installed using the click and fix mounting clip. Features a convienient LED light which indicates when there is an output from the convertor. The unit consumes an off load current of less than 15mA, likely to be less than the self discharge current of your battery. Its dimensions are: 89mm x 87mm x 50mm.

• Alfatronix Voltage converter 24Vdc to 12Vdc • 6A/10A non isolated • IP53 rated • Fits into click and fix mounting clip • Green Led indicates when there is an output from the converter • Dimensions 89 x 87 x 50mm

• Alfatronix Voltage converter 24Vdc to 12Vdc
• 6A/10A non isolated
• IP53 rated
• Fits into click and fix mounting clip
• Green Led indicates when there is an output from the converter
• Dimensions 89 x 87 x 50mm

Additional information